Hi Sascha,<br><br>thank you very much for looking into this issue and helping us with your solutions. For your reference, below is the message traced from the default ctk example, between the CTK host and app. As Ben, suggested It looks there could be something wrong at the QtSoap level itself so I'll try to debug the Qtsoap library. In case if you have a different version that has the namespace appearing or if you have some suggestions please let us know. <br>
<br><SOAP-ENV:Body xmlns:SOAP-ENV="<a href="http://schemas.xmlsoap.org/soap/envelope/">http://schemas.xmlsoap.org/soap/envelope/</a>"><br><notifyStateChanged xmlns="<a href="http://wg23.dicom.nema.org/">http://wg23.dicom.nema.org/</a>"><br>
<newState<b style="background-color: rgb(255, 0, 0);"> :type="xsd:string"></b>IDLE</newState><br></notifyStateChanged><br></SOAP-ENV:Body><br></SOAP-ENV:Envelope><br><br>Once again thank you very much!<br>
~Anthony<br><br><br><br><div class="gmail_quote">On Fri, Sep 9, 2011 at 4:26 AM, Sascha Zelzer <span dir="ltr"><<a href="mailto:s.zelzer@dkfz-heidelberg.de">s.zelzer@dkfz-heidelberg.de</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
<u></u>
<div bgcolor="#ffffff" text="#000000">
Hi,<div class="im"><br>
<br>
On 09/09/2011 01:18 AM, Anthony Dass wrote:
<blockquote type="cite">
<div class="gmail_quote">Hello Sascha and Ben,</div>
<div class="gmail_quote"><br>
</div>
<div class="gmail_quote">Thank you very much for the quick and
detailed answers. </div>
<div class="gmail_quote"><br>
</div>
<div class="gmail_quote">
In addition, when we tried to validate the message using the
online validations - <a href="http://www.xmlvalidation.com" target="_blank">http://www.xmlvalidation.com</a> we
also see the type attribute :type="xsd:string" is not a valid
XML attribute string and also it looks that the namespace name
is missing here. The string should be either type="xsd:string"
if no namespace is used(without leading colon), or this
xmlns:type="xsd:string" if xmlns is a namespace name.</div>
<div class="gmail_quote"><br>
</div>
<div class="gmail_quote">Since the method addMethodAttribute
of QtSoapmessage is setting this, is that we need to change in
the QtSoap module? or any other options? please advice.</div>
</blockquote>
<br></div>
I had a look at the messages yesterday and could actually not
reproduce your problem with the missing namespace (the messages
between the CTK host and CTK app looked correct). I also looked at
the QtSoap code and could not spot a problem at first sight.<br>
<br>
Best,<br><font color="#888888">
Sascha</font><div><div></div><div class="h5"><br>
<br>
<blockquote type="cite">
<div class="gmail_quote">
<br>
</div>
<div class="gmail_quote">thank you very much!</div>
<div class="gmail_quote">/Anthony</div>
<div class="gmail_quote"><br>
</div>
<br>
<div class="gmail_quote">On Thu, Sep 8, 2011 at 6:47 AM, <span dir="ltr"><<a href="mailto:ctk-developers-request@commontk.org" target="_blank">ctk-developers-request@commontk.org</a>></span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0pt 0pt 0pt 0.8ex;border-left:1px solid rgb(204, 204, 204);padding-left:1ex">Send Ctk-developers mailing list
submissions to<br>
<a href="mailto:ctk-developers@commontk.org" target="_blank">ctk-developers@commontk.org</a><br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
<a href="http://public.kitware.com/cgi-bin/mailman/listinfo/ctk-developers" target="_blank">http://public.kitware.com/cgi-bin/mailman/listinfo/ctk-developers</a><br>
or, via email, send a message with subject or body 'help' to<br>
<a href="mailto:ctk-developers-request@commontk.org" target="_blank">ctk-developers-request@commontk.org</a><br>
<br>
You can reach the person managing the list at<br>
<a href="mailto:ctk-developers-owner@commontk.org" target="_blank">ctk-developers-owner@commontk.org</a><br>
<br>
When replying, please edit your Subject line so it is more
specific<br>
than "Re: Contents of Ctk-developers digest..."<br>
<br>
<br>
Today's Topics:<br>
<br>
1. Re: CTK based Hosted App fails when launched from Non-CTK<br>
Host (Benoit Bleuze)<br>
<br>
<br>
----------------------------------------------------------------------<br>
<br>
Message: 1<br>
Date: Thu, 8 Sep 2011 12:46:30 +0200 (CEST)<br>
From: Benoit Bleuze <<a href="mailto:benoit.bleuze@inria.fr" target="_blank">benoit.bleuze@inria.fr</a>><br>
Subject: Re: [Ctk-developers] CTK based Hosted App fails when
launched<br>
from Non-CTK Host<br>
To: Sascha Zelzer <<a href="mailto:s.zelzer@dkfz-heidelberg.de" target="_blank">s.zelzer@dkfz-heidelberg.de</a>><br>
Cc: Anthony Dass <<a href="mailto:antdass@gmail.com" target="_blank">antdass@gmail.com</a>>, <a href="mailto:ctk-developers@commontk.org" target="_blank">ctk-developers@commontk.org</a><br>
Message-ID:<br>
<<a href="mailto:610925954.61455.1315478790178.JavaMail.root@zmbs4.inria.fr" target="_blank">610925954.61455.1315478790178.JavaMail.root@zmbs4.inria.fr</a>><br>
Content-Type: text/plain; charset="utf-8"<br>
<br>
Hi Anthony, Sascha gave you all the technical answers we had
in stock so far, but I can add a bit of context here, it may
help. As Sascha said, the state/newState switch is due to XIP
not following the specifications. And your change is valid. We
started with "state", but the only other host we could use
being XIP, we changed it. You are welcome to revert it. I
think we notified Larry (Lawrence Tarbox) of that problem
during the last hackfest in Chapel Hill. Eventually XIP will
change its API there (or so I hope). Replacing the WSDL files
doesn't change anything since we don't use them to generate
the interface, all the messages are hard coded soap messages
constructed from C++. Now I know nothing of the WCF
unfortunately, so I can't tell you whether the "type:" keyword
is misinterpreted or whatever. Sascha's suggestion of changing
the casing sounds promising to me. I remember we used capitals
in some actions , following the WSDL actually, and had to
change it afterwards for<br>
specifications and XIP compatibility. I remember Larry
telling us the WSDL provided in the specs was not up to date,
and thus we provide an updated (or at least it was valid last
february) set of WSDL (and siblings) files there: <a href="http://www.commontk.org/index.php/File:Wsdl_ft.zip" target="_blank">http://www.commontk.org/index.php/File:Wsdl_ft.zip</a>
Note that they also have actions starting with capitals. I
have a faint memory of Larry giving us an explanation as to
why they were upper cased, but I can't remember the reason, my
guess is that the .Net implementation forced them to do so.
And it is very well possible that the XIP java implementation
accepts both casing and the .NET or WCF are stricter, so I
guess you'll have to choose between the proposed WSDL and the
specifications... Keep us posted of your progress. Ben -----
Original Message -----<br>
> Hi Anthony,<br>
> Welcome to the ctk-developers list.<br>
> > We've tried adapting one of our DICOM application
into a CTK Based<br>
> > Hosted App. It works well when tried with the
ctkhost - we could<br>
> > launch the app, load the DICOM data and get through
different states<br>
> > as well.<br>
> So far, good news.<br>
> > However when tried launching the same app with
different non-ctk<br>
> > based<br>
> > host, it launches our app but fails to load any
data. This non-ctk<br>
> > based host seems to be written using the WCF as per
specification in<br>
> > DICOM 118.<br>
> Please note that we could only test our implementation
against the XIP<br>
> host (written in Java) so far. So the problems you are
experiencing<br>
> might very well relate to our implementation.<br>
> > On investigating, we noticed that the initial ?IDLE?
message sent by<br>
> > the App upon launch is not getting processed by the
Non-CTK based<br>
> > host.<br>
> > When traced the SOAP communication, we found out
that the messages<br>
> > from the plug-in are getting to the host, but then
they are not<br>
> > processed by WCF because of some WSDL contacts
mismatch. Thus the<br>
> > host<br>
> > does not receive any messages. Here?s the log
message:<br>
> > < Message > The message with Action '' cannot
be processed at the<br>
> > receiver, due to a ContractFilter mismatch at the<br>
> > EndpointDispatcher.<br>
> > This may be because of either a contract mismatch
(mismatched<br>
> > Actions<br>
> > between sender and receiver) or a binding/security
mismatch between<br>
> > the sender and the receiver. Check that sender and
receiver have the<br>
> > same contract and the same binding (including
security requirements,<br>
> > e.g. Message, Transport, None). </ Message ><br>
> > When debugging the WCF processing of the message we
get the<br>
> > deserialization error:<br>
> > "The ':' character, hexadecimal value 0x3A, cannot
be included in a<br>
> > name. Line 4, position 11."<br>
> > Here?s the SOAP message braced between the
CTK-plugin and Non-CTK<br>
> > based Host:<br>
> > < SOAP-ENV:Envelope xmlns:SOAP-ENV = "<br>
> > <a href="http://schemas.xmlsoap.org/soap/envelope/" target="_blank">http://schemas.xmlsoap.org/soap/envelope/</a>
" SOAP-ENV:encodingStyle =<br>
> > "<br>
> > <a href="http://schemas.xmlsoap.org/soap/encoding/" target="_blank">http://schemas.xmlsoap.org/soap/encoding/</a>
" xmlns:xsd = "<br>
> > <a href="http://www.w3.org/1999/XMLSchema" target="_blank">http://www.w3.org/1999/XMLSchema</a>
" ><br>
> > < SOAP-ENV:Body xmlns:SOAP-ENV = "<br>
> > <a href="http://schemas.xmlsoap.org/soap/envelope/" target="_blank">http://schemas.xmlsoap.org/soap/envelope/</a>
" ><br>
> > < notifyStateChanged xmlns = " <a href="http://wg23.dicom.nema.org/" target="_blank">http://wg23.dicom.nema.org/</a> " ><br>
> > < newState :type = " xsd:string " > IDLE </
newState ><br>
> > </ notifyStateChanged ><br>
> > </ SOAP-ENV:Body ><br>
> > </ SOAP-ENV:Envelope ><br>
> > We can see the ?:type? item in the newState element
that?s causing<br>
> > the<br>
> > error in WCF. Also, per DICOM supplement 118 it
should be called<br>
> > ?state?, not ?newState?.<br>
> Looking at the debug output from the CTK hosted app, the
xml namespace<br>
> for the "type" attribute in the "newState" tag is intact.
So I am<br>
> wondering it the output above has already been modified
somehow by the<br>
> WCF host or if it is the original message from the CTK
hosted app.<br>
> > Here?s the example of the SOAP message generated by
Non-CTK based<br>
> > HostedApp: < s:Envelope xmlns:s = "<br>
> > <a href="http://schemas.xmlsoap.org/soap/envelope/" target="_blank">http://schemas.xmlsoap.org/soap/envelope/</a>
" > < s:Body > <<br>
> > NotifyStateChanged xmlns = "<br>
> > <a href="http://dicom.nema.org/PS3.19/HostService-20100825" target="_blank">http://dicom.nema.org/PS3.19/HostService-20100825</a>
" > < state > IDLE<br>
> > </ state > </ NotifyStateChanged > </
s:Body > </ s:Envelope ><br>
> > Next, we tried changing ?newState? to ?state? but
again it fails<br>
> > when<br>
> > tried with the non-ctk based host and producing the
same error.<br>
> I think it is still either related to the ":type"
attribute or the<br>
> error described below. Concerning state/newState, please
also see my<br>
> comments below.<br>
> > ...<br>
> > 2011-09-06 17:17:59,609 <faultstring
xsi:type="xsd:string"<br>
> > xmlns:xsi="<br>
> > <a href="http://www.w3.org/1999/XMLSchema-instance" target="_blank">http://www.w3.org/1999/XMLSchema-instance</a>
">The message with Action<br>
> > ''<br>
> > cannot be processed at the receiver, due to a
ContractFilter<br>
> > mismatch<br>
> > at the EndpointDispatcher. This may be because of
either a contract<br>
> > mismatch (mismatched Actions between sender and
receiver) or a<br>
> > binding/security mismatch between the sender and the
receiver. Check<br>
> > that sender and receiver have the same contract and
the same binding<br>
> > (including security requirements, e.g. Message,
Transport,<br>
> > None).</faultstring> ...<br>
> This actually hints at a problem concerning the action
names. Looking<br>
> at the WSDL, the operation names start with upper case
latters, where<br>
> we are using lower case (unfortunately, the text in the
DICOM Part 19<br>
> specs refer to the method names with starting lower case
letters).<br>
> > I even tried replacing the WSDL files with the one
provided by<br>
> > Non-CTK<br>
> > based host, but still it doesn?t seem to work.<br>
> Yes, that does not change the actual behavior.<br>
> > When looked at the code, I noticed a comment in the
CTK code (below<br>
> > methods) ?spec would be "state", java has "newState"
FIX<br>
> > JAVA/STANDARD?. Could this be something we need to
look for? If so<br>
> > may<br>
> > I know what would be the change in Java side.<br>
> Unfortunately, again, the text in the specs refer to
"newState" for<br>
> the argument name and this is what the XIP host is using.
So we used<br>
> it too for testing with XIP. But I agree that the WSDL
should be the<br>
> definite guide and we should use "state" when not testing
with XIP.<br>
> My advice would be to keep your modification ("newState"
-> "state")<br>
> and also try to modify the action (method) names in<br>
> ctkDicomAppService.cpp (lines 40 - 60) to use upper case
for the first<br>
> letter.<br>
> I would be happy if you could keep us posted about your
progress.<br>
> Thanks,<br>
> Sascha<br>
> _______________________________________________<br>
> Ctk-developers mailing list<br>
> <a href="mailto:Ctk-developers@commontk.org" target="_blank">Ctk-developers@commontk.org</a><br>
> <a href="http://public.kitware.com/cgi-bin/mailman/listinfo/ctk-developers" target="_blank">http://public.kitware.com/cgi-bin/mailman/listinfo/ctk-developers</a><br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="http://public.kitware.com/pipermail/ctk-developers/attachments/20110908/e75bdbbd/attachment.htm" target="_blank">http://public.kitware.com/pipermail/ctk-developers/attachments/20110908/e75bdbbd/attachment.htm</a>><br>
<br>
------------------------------<br>
<br>
_______________________________________________<br>
Ctk-developers mailing list<br>
<a href="mailto:Ctk-developers@commontk.org" target="_blank">Ctk-developers@commontk.org</a><br>
<a href="http://public.kitware.com/cgi-bin/mailman/listinfo/ctk-developers" target="_blank">http://public.kitware.com/cgi-bin/mailman/listinfo/ctk-developers</a><br>
<br>
<br>
End of Ctk-developers Digest, Vol 26, Issue 6<br>
*********************************************<br>
</blockquote>
</div>
<br>
</blockquote>
<br>
</div></div></div>
</blockquote></div><br>