[ITK] [ITK-dev] Module_ITKIOGDCM:INTERNAL=OFF

Mathieu Malaterre mathieu.malaterre at gmail.com
Tue Sep 15 12:02:35 EDT 2015


Hi Brad,

ITK_USE_SYSTEM_GDCM is not an option for me. I am given an already
compiled ITK version (statically if that matters).

I understand now the need for GDCM deep down in the build settings. I
think I should be able to tweak `include(${ITK_USE_FILE})` to remove
automatic io factory registration and drop "*GDCM*" from
${ITK_LIBRARIES}.

Will let you know how it goes. Thanks for your help.

-M

On Fri, Sep 4, 2015 at 9:21 PM, Bradley Lowekamp <blowekamp at mail.nih.gov> wrote:
> Hello,
>
> Have you looking into "ITK_USE_SYSTEM_GDCM", this should allow ITK to use the same version of GDCM that the rest of your application is?
>
> For the modular build, have you looked into disabling "BUILD_TESTING"? Also please keep in mind that the a module's status is cached in CMake. So you must start with a fresh directory then configure from the command line which modules are on and off.
>
> Many ImageIOs are needed to do testing [1], supporting DICOM and DICOM metadata are of core importance for ITK, so we do test with it in many places.The modularization works really good without the ITK testing enabled. But the interdependency of testing that everything works does enable most modules.
>
> HTH,
> Brad
>
> [1] https://github.com/InsightSoftwareConsortium/ITK/blob/master/Modules/Core/TestKernel/itk-module.cmake
>
> On Sep 4, 2015, at 3:55 AM, Mathieu Malaterre <mathieu.malaterre at gmail.com> wrote:
>
>> Dear all,
>>
>> My goal is to be able to compile ITK without the GDCM module.
>>
>> Long story short, GDCM toolkit is not being mangled, which means very
>> complex build setup to be able to use GDCM and ITK in an application.
>>
>> So far I have tried setting:
>>
>> Module_ITKIOGDCM:INTERNAL=OFF
>>
>> with no luck
>>
>> I suspect that GDCM is activated by ITK_BUILD_DEFAULT_MODULES, so I tried:
>>
>> $ cmake -DITK_BUILD_DEFAULT_MODULES:BOOL=OFF
>>
>> this leads to:
>>
>> -- Check if the system is big endian - little endian
>> CMake Error at Examples/CMakeLists.txt:2 (message):
>>  BUILD_EXAMPLES requires ITK_BUILD_DEFAULT_MODULES to be ON
>>
>>
>> -- Configuring incomplete, errors occurred!
>>
>>
>> Later I tried:
>>
>> $ cmake -DITK_BUILD_DEFAULT_MODULES:BOOL=OFF -DBUILD_EXAMPLES:BOOL=OFF ..
>>
>> which states:
>>
>> -- Enabled ITKIOGDCM, needed by [ITKTestKernel].
>> and
>> -- Enabled ITKTestKernel, needed by [ITKGroup_Core].
>>
>>
>> However I do not want to set -DITKGroup_Core:BOOL=OFF (obvisouly).
>>
>> Is there any particular reason to have GDCM be part of the core group ?
>>
>>
>>
>> Thanks,
>> --
>> Mathieu
>> _______________________________________________
>> Powered by www.kitware.com
>>
>> Visit other Kitware open-source projects at
>> http://www.kitware.com/opensource/opensource.html
>>
>> Kitware offers ITK Training Courses, for more information visit:
>> http://kitware.com/products/protraining.php
>>
>> Please keep messages on-topic and check the ITK FAQ at:
>> http://www.itk.org/Wiki/ITK_FAQ
>>
>> Follow this link to subscribe/unsubscribe:
>> http://public.kitware.com/mailman/listinfo/insight-developers
>



-- 
Mathieu
_______________________________________________
Powered by www.kitware.com

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Kitware offers ITK Training Courses, for more information visit:
http://kitware.com/products/protraining.php

Please keep messages on-topic and check the ITK FAQ at:
http://www.itk.org/Wiki/ITK_FAQ

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/insight-developers


More information about the Community mailing list